40'' Stainless Steel C-Stand with Grip Arm Kit - SA CSS-200S

€ 114.99 · 4.5 (468) · En stock

Por un escritor de hombre misterioso

The Savage 40″ (102cm) Stainless Steel C-Stand is a feature-rich production support! A patented junior receiver on the lowest leg gives this stand a leg up from the competition. This feature allows users to place a second light or modifier low to the ground, and position the stand into a corner for optimal output in compact spaces. Do more with less gear in the way! An included 20″ (51cm) riser with junior to baby pin stores away onto the side of the 40″ riser when not in use, and can be mounted into the leg’s junior receiver for double action. Mount two lights or one light and a scrim onto both risers to get maximum use from one C-stand. Remove the junior to baby pin from the 20″ riser and drop into the leg junior receiver for ultra-low positioning. Transfer the 40″ riser from the center to the leg junior receiver to move a light snugly into a corner. Adjust the 20″ riser through the foot of the leg to level the stand on stairs or uneven surfaces. Measuring at 9′ 6″ (2.9m) tall fully extended, this two riser stand is a heavy-duty stainless steel support that can secure up to a 25 lb. (11.33kg) load (more than the competition!) and handle rugged usage in the studio or on location. Fast-acting, foldable legs on a turtle base open/close and lock easily with a pull release knob. Stand includes an adjustable hook for hanging cables and controllers (when mounted high on the column) or sandbags and ballasts (when mounted low) and can fold up alongside the riser when not in use. Enjoy the convenience of a Rocky Mountain leg and turtle base from one stand. Includes: Removable stainless steel turtle base 40″ (102cm) Stainless steel 3-section riser 20″ (51cm) Stainless steel riser Junior to baby pin Removable hanging hook Sandbags (not included) are highly recommended for use with this stand when mounting heavy objects. -Anti-rust stainless steel -Removable turtle base -Junior receiver on leg allows for either included risers to be placed snug in a corner, or for low placement of a second light or modifier (patented feature!) -Leg leveler for uneven surfaces or stairs -Pull release knob locks legs into open or closed position -Dual baby pin mount possibilities -8mm – 35mm Gobo head clamping range -Gobo head clamps lined with EPDM rubber to prevent damage on thin walled tubes -Grip arm ends include one 3/8''-16 male threaded and one 1/4''-20 male threaded spigots -Blue padded handle for comfortable grip -Maximum load: 25 lbs. (11.3kg) -Minimum working height: 53'' (1.35m) -Maximum working height: 114'' (2.9m) -Footprint: 25'' (64cm) -Collapsed leg width: 22'' (56cm)
The Savage 40″ (102cm) Stainless Steel C-Stand is a feature-rich production support! A patented junior receiver on the lowest leg gives this stand a leg up from the competition. This feature allows users to place a second light or modifier low to the ground, and position the stand into a corner for optimal output in compact spaces. Do more with less gear in the way!

An included 20″ (51cm) riser with junior to baby pin stores away onto the side of the 40″ riser when not in use, and can be mounted into the leg’s junior receiver for double action. Mount two lights or one light and a scrim onto both risers to get maximum use from one C-stand. Remove the junior to baby pin from the 20″ riser and drop into the leg junior receiver for ultra-low positioning. Transfer the 40″ riser from the center to the leg junior receiver to move a light snugly into a corner. Adjust the 20″ riser through the foot of the leg to level the stand on stairs or uneven surfaces.

Measuring at 9′ 6″ (2.9m) tall fully extended, this two riser stand is a heavy-duty stainless steel support that can secure up to a 25 lb. (11.33kg) load (more than the competition!) and handle rugged usage in the studio or on location. Fast-acting, foldable legs on a turtle base open/close and lock easily with a pull release knob. Stand includes an adjustable hook for hanging cables and controllers (when mounted high on the column) or sandbags and ballasts (when mounted low) and can fold up alongside the riser when not in use.

Enjoy the convenience of a Rocky Mountain leg and turtle base from one stand.

Includes:
Removable stainless steel turtle base
40″ (102cm) Stainless steel 3-section riser
20″ (51cm) Stainless steel riser
Junior to baby pin
Removable hanging hook

Sandbags (not included) are highly recommended for use with this stand when mounting heavy objects.

-Anti-rust stainless steel
-Removable turtle base
-Junior receiver on leg allows for either included risers to be placed snug in a corner, or for low placement of a second light or modifier (patented feature!)
-Leg leveler for uneven surfaces or stairs
-Pull release knob locks legs into open or closed position
-Dual baby pin mount possibilities
-8mm – 35mm Gobo head clamping range
-Gobo head clamps lined with EPDM rubber to prevent damage on thin walled tubes
-Grip arm ends include one 3/8''-16 male threaded and one 1/4''-20 male threaded spigots
-Blue padded handle for comfortable grip

-Maximum load: 25 lbs. (11.3kg)
-Minimum working height: 53'' (1.35m)
-Maximum working height: 114'' (2.9m)
-Footprint: 25'' (64cm)
-Collapsed leg width: 22'' (56cm)